[DUG] Fwd: Delphi - Installing / Updating Components - specificallyIndy

[Paul Hectors]

Related but not the answer to the question.

The Indy website does not give you very good direction on what to download
but my understanding is you should be using the Tiburon.zip because it is
the latest and most stable. The Indy10.zip is a very old version.

I have asked the Indy Webmaster to change the download information but there
have been no changes so far.

Best regards,

Paul

2009/6/25 Pieter De Wit <pieter at insync.za.net>

>  Hi Richard,
>
> This is from memory but it might help you:
>
> Under the zip file is a \Lib directory. They have batch files in there that
> will install Indy for a version of Delphi. Make sure the whole zip is
> extracted before running that command. The manual side of things is to
> install the .dpk files yourself, which would involve the instructions listed
> below, but for Delphi (it's the "same" really)
>
> Hope that helps !
>
> Pieter
>
> ----- Original Message -----
> *From:* Richard Vowles <richard at developers-inc.co.nz>
> *To:* NZ Borland Developers Group - Delphi List <delphi at delphi.org.nz>
> *Sent:* Wednesday, June 24, 2009 11:02 PM
> *Subject:* [DUG] Fwd: Delphi - Installing / Updating Components -
> specificallyIndy
>
> Can anyone help Graham? I don't know much about the Indy components....
>
> ---------- Forwarded message ----------
> From: Graham Marsden <graham at wk.planet.gen.nz>
> Date: 2009/6/24
> Subject: Re: Delphi - Installing / Updating Components - specifically Indy
> To: Richard Vowles <richard at developers-inc.co.nz>
>
>
> Hi Richard
>
> Thanks for getting back to quickly. Yes go ahead and send it on.
>
> Cheers
>
> Graham
>
> On 24 Jun 2009 at 14:33, Richard Vowles wrote:
>
> Can I forward this to the local Delphi list? They would have a better idea.
> www.delphi.org.nz in case you wish to
> ask yourself.
>
> 2009/6/24 Graham Marsden <graham at wk.planet.gen.nz>
>    Hi Richard
>
> I have this version of Delphi ....
> CodeGearTM RAD Studio 2007 Version 11.0.2804.9245 Copyright © 2007
> CodeGearTM.
> with Indy Direct version 10.1.5 installed.
>
> Hopefully you can help with my problem ...
>
> I want to use an indy component called IdAttachmentFile - I know it exists
> as I have the .pas file for it in the
> C:\Program Files\CodeGear\RAD Studio\5.0\source\Indy\Indy10\Protocols
> driectory and have seen
> references to it on the net and in code samples. BUT I don't see it in any
> of the the Indy Component Pallets.
> Plus I cannot see how to do a reinstall of what is obviously there.
>
> So I download the latest update from http://indy.fulgan.com/ZIP/indy10.zipwhich is only days old, hoping that an
> update might be the answer.
>
> Trouble is I cannot find any step by step instructions on how to install
> this update - there are these instrction in the
> help system but there are no more specifics on how this is done.
>
> Delphi and C++ Builder Installation
> Installing Indy.Sockets in a Borland IDE involves using the run-time and
> design-time packages
> files to compile the source code in the library. After compiling the
> packages and source code,
> design-time packages are installed in the IDE to make the components
> available on the component
> palette.
> For Delphi and C++ Builder, the run-time package files should be opened and
> compiled in the
> following order:
> *   IndySystem (in LibSystem)
> *   IndyCore (in LibCore)
> *   IndyProtocols (in LibProtocols)
> *   IndySuperCore (in LibSuperCore) (for Delphi 7 only)
> For Delphi and C++ Builder, the design-time package files should be opened,
> compiled, and
> installed in the following order:
> *   dclIndyCore (in LibCore)
> *   dclIndyProtocols (in LibProtocols)
> *   dclSuperCore (in LibSuperCore) (for Delphi 7 only)
>
> What is the step by step process for all of this, I have roamed the net in
> vain for some enlightenment but
> cannnot penetrate the techspeak for a simple how to.
>
> I hope you can help me out here with a process, or a more helpful source on
> the net.
>
> Many thanks
>
> Graham Marsden
>
>
>
>
> --
> ---
> Richard Vowles, Technical Advisor
> Developers Inc Ltd
> web. http://www.developers-inc.co.nz
> ph. +64-9-3600231, mob. +64-275-467747, fax. +64-9-3600384
> skype. rvowles, LinkedIn, Twitter
>
>
>
>
>
> --
> ---
> Richard Vowles, Technical Advisor
> Developers Inc Ltd
> web. http://www.developers-inc.co.nz
> ph. +64-9-3600231, mob. +64-275-467747, fax. +64-9-3600384
> skype. rvowles, LinkedIn, Twitter
>
>
>  ------------------------------
>
> _______________________________________________
> NZ Borland Developers Group - Delphi mailing list
> Post: delphi at delphi.org.nz
> Admin: http://delphi.org.nz/mailman/listinfo/delphi
> Unsubscribe: send an email to delphi-request at delphi.org.nz with Subject:
> unsubscribe
>
>
> _______________________________________________
> NZ Borland Developers Group - Delphi mailing list
> Post: delphi at delphi.org.nz
> Admin: http://delphi.org.nz/mailman/listinfo/delphi
> Unsubscribe: send an email to delphi-request at delphi.org.nz with Subject:
> unsubscribe
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listserver.123.net.nz/pipermail/delphi/attachments/20090625/c7ae41b9/attachment.html