[DUG] Fax issue

[Jeremy Coulter]

that did go thru our minds, but the concern is more, why does having the
areacode make any difference to the transmission of the data? the fax still
rings and answers it just doesnt accept the transmission. Its WAY out there
!

Jeremy

On Tue, Aug 10, 2010 at 12:02 PM, Conor Boyd <Conor.Boyd at trimble.co.nz>wrote:

>  What about including the international part, e.g. +64 3 353 9901?
>
> Never used AsyncPro, so can't make any suggestions on that side, sorry.
>
> C.
>
>  ------------------------------
>  *From:* delphi-bounces at delphi.org.nz [mailto:delphi-bounces at delphi.org.nz]
> *On Behalf Of *Jeremy Coulter
>
> Hi all.
> Dont get me started on why we have to use faxes but we have to.
>
> Heres the issue. we are using the AsyncPro fax controls (in Delphi 2010) to
> send faxes. It all works well, EXCEPT, if we add an area code on to the
> recipients phone number, say 033539901 (with 1, for the dialing prefix) the
> fax machine rings, it answers, but refuses to accept the fax.
> if I strip out the 03 (still using the 1, for the dialing prefix) it works
> fine !!!!
> Now if its local numbers we were using then no prob, but we are going to
> have to send to another town.
>
> Has anyone see this before or have any suggestions?
>
> _______________________________________________
> NZ Borland Developers Group - Delphi mailing list
> Post: delphi at delphi.org.nz
> Admin: http://delphi.org.nz/mailman/listinfo/delphi
> Unsubscribe: send an email to delphi-request at delphi.org.nz with Subject:
> unsubscribe
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listserver.123.net.nz/pipermail/delphi/attachments/20100810/eaa5f976/attachment.html