[DUG] [OFF-TOPIC] memory issues
David Brennan
dugdavid at dbsolutions.co.nz
Fri Apr 17 12:07:10 NZST 2009
The 2 * 30 inch screens sounded too much to me too although obviously if it
works for someone then go for it!
With screens I find it is a bell curve, more is most definitely best, but
only up to a point, then the extra space actually becomes distracting. With
my 24" screen at work (screen #2, screen #1 is my laptop screen) I initially
tried it vertical on the basis that I am writing/scrolling vertical lists of
code but it was just huge... my eyes couldn't comfortably track up and down
that large an angle. Left to right is less of an issue but even then get too
many/too wide screens wrapped around and it just gets too hard to use the
extreme left and rights.
I haven't tried it but imagine 3 screens being the maximum I could use, one
large one (eg 24" widescreen, probably no more) in centre, and two smaller
ones (eg 19" 5x4 ratio) either side.
My 2c.
-----Original Message-----
From: delphi-bounces at delphi.org.nz [mailto:delphi-bounces at delphi.org.nz] On
Behalf Of Alister Christie
Sent: Friday, 17 April 2009 11:24 a.m.
To: NZ Borland Developers Group - Delphi List
Subject: Re: [DUG] [OFF-TOPIC] memory issues
I think with 2 30 inch screens you'd get neck strain. I've heard of
people having a 30 inch screen and two smaller screens rotated either
side (so that their width matches the height of the big screen) - which
means that you don't have a gap directly in front of you.
I have a 26 inch screen at home and this was as large as I could justify
to myself for the price. It has a 21 inch CRT beside it, but I haven't
felt the need to use it for awhile (not doing much coding on that
computer lately)
Alister Christie
Computers for People
Ph: 04 471 1849 Fax: 04 471 1266
http://www.salespartner.co.nz
PO Box 13085
Johnsonville
Wellington
Leigh Wanstead wrote:
> If money is not an issue, I think two 30 inch lcd monitors is the way
> to go ;-)
>
> I only got one at home to look at my photos. It is amazing. I used a
> spyder to adjusted the color. I am programming c at home using gcc
> which is great to look at everything on that 30inch lcd monitor.
>
> Have a nice day
>
> Regards
> Leigh
>
> -----Original Message-----
> *From:* delphi-bounces at delphi.org.nz
> [mailto:delphi-bounces at delphi.org.nz]*On Behalf Of *Kyley Harris
> *Sent:* Friday, 17 April 2009 9:55 a.m.
> *To:* NZ Borland Developers Group - Delphi List
> *Subject:* Re: [DUG] [OFF-TOPIC] memory issues
>
> id never work on that little thing.. dvd player.. I have a Quad
> Core with 2 22" montiors running 1600x1050
>
> On Fri, Apr 17, 2009 at 9:50 AM, Alister Christie
> <alister at salespartner.co.nz <mailto:alister at salespartner.co.nz>>
> wrote:
>
> except you'd go blind if you had to do any real dev work on
> because of
> the small screen. I now plug an external 24 inch screen into
> my laptop
> for a similar reason (fewer headaches). The laptop does have
> a 17 inch
> screen but at 1920x1200 things are a bit small. I remember
> when I was
> first programming in Delphi on a 14 (maybe it was 15) inch
> monitor - my
> how things have changed.
>
> Alister Christie
> Computers for People
> Ph: 04 471 1849 Fax: 04 471 1266
> http://www.salespartner.co.nz
> PO Box 13085
> Johnsonville
> Wellington
>
>
>
> Kyley Harris wrote:
> > I have one of those $500 Asus EEE computers that runs
> windows XP on
> > 256MB of ram, and a 4GB SSD.. takes 25seconds to boot up..
> way faster
> > than any other laptop.. still has 120mb free ram and 1gb of disk
> > space.. I plug a USB hdd into it and its great. battery life
> is awesome
> >
> > On Thu, Apr 16, 2009 at 6:31 PM, Stefan Mueller
> > <muellers at orcl-toolbox.com
> <mailto:muellers at orcl-toolbox.com>
> <mailto:muellers at orcl-toolbox.com
> <mailto:muellers at orcl-toolbox.com>>> wrote:
> >
> > I am also keeping my eyes open for SSD .. those drives
> should be
> > able to
> > improve compile speeds drastically ... they have close to no
> > seek-times and
> > manage to read thousands of small files at high speed.
> >
> > I probably go with one of the PCIe cards coming out soon
> (like OCZ
> > Z-Drive,
> > or PhotoFast Monster) if the price is ok. PCIe cards
> have the
> > advantage that
> > they get over the 300MBps (theoretical) limit that
> SATA-II has.
> >
> > The OCZ Vertex-II drive also looks promising:
> >
>
http://www.fudzilla.com/index.php?Itemid=67&id=11365&option=com_content&task
>
<http://www.fudzilla.com/index.php?Itemid=67&id=11365&option=com_content&tas
k>
> > =view
> >
>
<http://www.fudzilla.com/index.php?Itemid=67&id=11365&option=com_content&tas
k%0A=view
>
<http://www.fudzilla.com/index.php?Itemid=67&id=11365&option=com_content&tas
k%0A=view>>
> >
> >
> > Regards,
> > Stefan
> >
> >
> > -----Original Message-----
> > From: delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>
> > <mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>>
> > [mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>
> > <mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>>] On
> > Behalf Of Ross Levis
> > Sent: Thursday, April 16, 2009 10:56
> > To: 'NZ Borland Developers Group - Delphi List'
> > Subject: Re: [DUG] [OFF-TOPIC] memory issues
> >
> > I'm looking forward to larger cheaper solid state drives
> which
> > last up to
> > 100 years, replacing hard drives which fail every few
> years. 10+
> > times
> > faster than a hard drive. I've heard a PC with one of these
> > drives can boot
> > Windows XP in 4 seconds.
> >
> > Prices will get below US$2 per GB this year. It's still
> out of my
> > price
> > range, but I'm considering upgrading my laptop's hard
> drive to a 240GB
> > SanDisk drive later this year.
> > http://www.geekzone.co.nz/content.asp?contentid=8040
> >
> > Ross.
> >
> > -----Original Message-----
> > From: delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>
> > <mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>>
> > [mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>
> > <mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>>] On
> > Behalf Of Richard Bullin
> > Sent: Thursday, 16 April 2009 12:15 p.m.
> > To: NZ Borland Developers Group - Delphi List
> > Subject: Re: [DUG] BDS.exe memory issues
> >
> > I'm not really sure if 300mb classifies Delphi as a
> memory hog if you
> > look at getting one of the below computers with 192GB of
> ram, I
> > foresee
> > a surge in lazy programmers :)
> >
> >
>
http://www.computerworld.com/action/article.do?command=viewArticleBasic&
>
<http://www.computerworld.com/action/article.do?command=viewArticleBasic&>
> > articleId=9130538
> >
>
<http://www.computerworld.com/action/article.do?command=viewArticleBasic&%0A
articleId=9130538
>
<http://www.computerworld.com/action/article.do?command=viewArticleBasic&%0A
articleId=9130538>>
> >
> >
> > Richard
> >
> > -----Original Message-----
> > From: delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>
> > <mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>>
> > [mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>
> > <mailto:delphi-bounces at delphi.org.nz
> <mailto:delphi-bounces at delphi.org.nz>>]
> > On Behalf Of Alister Christie
> > Sent: Thursday, 16 April 2009 12:01 p.m.
> > To: NZ Borland Developers Group - Delphi List
> > Subject: Re: [DUG] BDS.exe memory issues
> >
> > Currently I'm on 254MB.
> >
> > Close Delphi - 0MB
> > Open Delphi - 11MB
> > Open Project - 71MB
> > Compile - 154MB (peaking at around 170MB)
> > Open a Project with modeling support - 215MB
> >
> > And the numbers just keep going up from there the more
> you do.
> >
> > I think it's fair to say that it is a bit of a memory
> hog. Although I
> > have 6 chrome processes running currently eating up a
> total of 155MB.
> >
> > I guess we could turn this into a discussion of who is
> running the
> > most
> > memory hungry App and/or instance of Delphi currently?
> > (Currently Jeremy leads at 307MB)
> >
> > Alister Christie
> > Computers for People
> > Ph: 04 471 1849 Fax: 04 471 1266
> > http://www.salespartner.co.nz
> > PO Box 13085
> > Johnsonville
> > Wellington
> >
> >
> >
> > Jeremy Coulter wrote:
> > > Does anyone else get issues with BDS.exe (delphi 2007)
> using a
> > HEAP of
> >
> > > memory?
> > > at the moment its sitting on 307mb of mem usage !
> > >
> > > Admittedly my current machine only has 2GB (new
> machine has been
> > > ordered....YAY) but seriously, thats HEAPS.
> > > In saying that, I notic that FireFox is sitting on
> 131mb too.
> > >
> > > just wondered if this is a common issue, and if there is a
> > solution to
> >
> > > it or not.
> > >
> > >
> > > Jeremy
> > >
> > >
> >
>
------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > NZ Borland Developers Group - Delphi mailing list
> > > Post: delphi at delphi.org.nz
> <mailto:delphi at delphi.org.nz> <mailto:delphi at delphi.org.nz
> <mailto:delphi at delphi.org.nz>>
> > > Admin: http://delphi.org.nz/mailman/listinfo/delphi
> > > Unsubscribe: send an email to
> delphi-request at delphi.org.nz <mailto:delphi-request at delphi.org.nz>
> > <mailto:delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz>> with
> > Subject: unsubscribe
> > _______________________________________________
> > NZ Borland Developers Group - Delphi mailing list
> > Post: delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>
> <mailto:delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>>
> > Admin: http://delphi.org.nz/mailman/listinfo/delphi
> > Unsubscribe: send an email to
> delphi-request at delphi.org.nz <mailto:delphi-request at delphi.org.nz>
> > <mailto:delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz>> with Subject:
> > unsubscribe
> >
> > _______________________________________________
> > NZ Borland Developers Group - Delphi mailing list
> > Post: delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>
> <mailto:delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>>
> > Admin: http://delphi.org.nz/mailman/listinfo/delphi
> > Unsubscribe: send an email to
> delphi-request at delphi.org.nz <mailto:delphi-request at delphi.org.nz>
> > <mailto:delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz>> with Subject:
> > unsubscribe
> >
> > _______________________________________________
> > NZ Borland Developers Group - Delphi mailing list
> > Post: delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>
> <mailto:delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>>
> > Admin: http://delphi.org.nz/mailman/listinfo/delphi
> > Unsubscribe: send an email to
> delphi-request at delphi.org.nz <mailto:delphi-request at delphi.org.nz>
> > <mailto:delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz>> with Subject:
> > unsubscribe
> >
> >
> > _______________________________________________
> > NZ Borland Developers Group - Delphi mailing list
> > Post: delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>
> <mailto:delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>>
> > Admin: http://delphi.org.nz/mailman/listinfo/delphi
> > Unsubscribe: send an email to
> delphi-request at delphi.org.nz <mailto:delphi-request at delphi.org.nz>
> > <mailto:delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz>> with Subject: unsubscribe
> >
> >
> >
> >
> > --
> > Kyley Harris
> > Harris Software
> > +64-21-671-821
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > NZ Borland Developers Group - Delphi mailing list
> > Post: delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>
> > Admin: http://delphi.org.nz/mailman/listinfo/delphi
> > Unsubscribe: send an email to delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz> with Subject: unsubscribe
> _______________________________________________
> NZ Borland Developers Group - Delphi mailing list
> Post: delphi at delphi.org.nz <mailto:delphi at delphi.org.nz>
> Admin: http://delphi.org.nz/mailman/listinfo/delphi
> Unsubscribe: send an email to delphi-request at delphi.org.nz
> <mailto:delphi-request at delphi.org.nz> with Subject: unsubscribe
>
>
>
>
> --
> Kyley Harris
> Harris Software
> +64-21-671-821
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> NZ Borland Developers Group - Delphi mailing list
> Post: delphi at delphi.org.nz
> Admin: http://delphi.org.nz/mailman/listinfo/delphi
> Unsubscribe: send an email to delphi-request at delphi.org.nz with Subject:
unsubscribe
_______________________________________________
NZ Borland Developers Group - Delphi mailing list
Post: delphi at delphi.org.nz
Admin: http://delphi.org.nz/mailman/listinfo/delphi
Unsubscribe: send an email to delphi-request at delphi.org.nz with Subject:
unsubscribe
More information about the Delphi
mailing list